Sony DHC-MD595 - Manual (Page 42)

42
1
Press FUNCTION repeatedly to switch
the function to MD.
2
While playing an MD, press X at the
starting point of the portion to be erased
(point A).
The MD pauses.
3
Press MENU/NO to display
“Edit Menu”.
4
Press – or + repeatedly until
“A-B Erase?” appears, then press
ENTER/YES.
5
Press ENTER/YES again.
“—Rehearsal—” and “Point A ok?” appear
alternately while the deck plays the selected
track from the beginning to point A.
6
While monitoring the sound, press .
or > repeatedly to find the starting
point of the portion to be erased (point
A).
You can shift the starting point by 1-frame*
intervals (1 frame = 1/86 second).
To shift the point by second or minute
intervals, press m or M so that second or
minute flashes, then press . or >.
* You can shift the starting point by 2-frame
intervals (tracks recorded in Monaural or LP2
Stereo mode) or by 4-frame intervals (tracks
recorded in LP4 Stereo mode).
7
Repeat step 6 until point A is played
correctly.
Erasing a portion of a track
(A-B Erase Function)
You can specify a portion within a track and erase
the portion with ease. You can shift the desired
portion by frame*, minute or second intervals.
This function is convenient when erasing
unnecessary sections after recording a satellite
broadcast or FM broadcast.
* 1 frame is 1/86 second.
E.g.: Erasing a portion of track 2.
1 2
1 2 3
3
A
A C
B- A
B-( A + C )
B- B B- C
3
4,6,
10
2
1
4,6, 10
4,5,8,
9, 11
m
M
Erasing recordings (continued)
Point B Point A
Original
tracks
Track
number
After
A-B
ERASE