Sony HCD-C450 - Manual (Page 80)

80 GB
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3 ohms loads, both channels driven, from 120 – 10,000 Hz; rated
80 watts per channel minimum RMS power, with no more than 10 %
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Stereo mode
North American and Mexican models:
80 W + 80 W (3 ohms at 1 kHz, THD 10 %)
Other models: 70 W + 70 W (4 ohms at 1 kHz, THD 10 %)
Surround mode
North American and Mexican models:
Front: 80 W + 80 W
Center*: 80 W
Rear*: 80 W + 80 W (3 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
Other models: Front: 70 W + 70 W
Center*: 70 W
Rear*: 70 W + 70 W (4 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog) AUDIO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
Inputs (Digital) AUDIO 2 (optical):
Sensitivity: –
Outputs (Analog) AUDIO 1 (AUDIO OUT):
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low and high-impedance headphones
Super Audio CD/DVD system
Laser Semiconductor laser
(Super Audio CD/DVD:
λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
Signal format system NTSC or NTSC/PAL
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
Signal-to-noise ratio More than 80 dB (AUDIO 1 (AUDIO) connectors only)
Harmonic distortion Less than 0.03 %