Sony HCD-C450 - Manual (Page 64)

64 GB
To listen to non-preset radio stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or – on
the remote repeatedly.
For automatic tuning, press and hold
TUNING + or – on the remote.
z If an FM program is noisy
Press STEREO/MONO on the remote so that
“MONO” appears on the front panel display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
z To improve reception
Reorient the supplied antennas.
To check the frequency or sound field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front
panel display changes as follows:
index name of the station
t frequency t
sound field t index name of the station
Naming Preset Stations
You can enter a name of up to 8 characters
for preset stations. These names (for
example, “XYZ”) appear in the system’s
front panel display when a station is
selected.
Note that no more than one name can be
entered for each preset station.
1
Press FUNCTION repeatedly until
TUNER appears on the front panel
display.
The last station you received is tuned
in.
Each time you press FUNCTION, the
mode of the system changes in the
following sequence:
DVD
t AUDIO 1 t AUDIO 2 t
TUNER t DVD...
2
Tune in the preset station you
want to create an index name for.
If you are not familiar with how to
tune in preset stations, see “Listening
to the Radio” on page 63.
NAME
C / X / x / c
ENTER
FUNCTION 1 2 3
4 5 6
7
>10 10/0
8 9