Sony HCD-C450 - Manual (Page 23)

Getting Star
ted
23 GB
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a To the
TV monitor MONITOR OUT jack
VCR AUDIO 1 jacks
Digital satellite receiver AUDIO 2 jacks
z When using the S-VIDEO jack instead of the VIDEO jack
Your TV monitor must also be connected via an S-VIDEO jack. S-video signals are on a separate bus from the
video signals and will not be output through the video jacks.
z When you are connecting the monitor, projector, or AV amplifier (receiver) having component
video input jacks (Y, P
B
, C
B,
P
R,
C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or
three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high
quality images.
Notes
• When you select AUDIO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the AUDIO 1 OUT L/R jacks.
• When you use the AUDIO 1 line outputs, please set the system to 2CH STEREO mode. If the system is not in
2CH STEREO mode, the line outputs may not function properly.
Red (R/audio)
Yellow Yellow
White (L/audio)
Red (R/audio)
White (L/audio)
continued