Sony HCD-C450 - Manual (Page 62)

62 GB
Controlling the TV with
the Supplied Remote
You can control your TV (Sony only) with
the supplied remote.
Controlling the TV with the remote
TV ? / 1
Number
buttons
Other Operations
COMMAND
MODE
DVD/TV
switch
ENTER
1 2 3
4 5 6
7
>10 10/0
8 9
TV/VIDEO
You can control your TV using the buttons
below.
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
Switching between TV and DVD
Using the COMMAND MODE DVD/TV
switch, you can switch the remote signal
between control of the TV and control of the
DVD unit. When you watch the DVD,
ensure that you have the COMMAND
MODE DVD/TV switch set to DVD.
The table below shows the buttons that are
affected by the COMMAND MODE DVD/
TV switch.
Button DVD TV
1~9, Standard number Selects channel
>10, button function numbers.
10/0 for DVD.
ENTER Standard enter Press after
function for selecting a
DVD. channel number.
. Standard TV CH –
preceding title,
chapter skip
function for
DVD.
> Standard forward TV CH +
title, chapter
skip for DVD.
VOL + VOL + VOL +
VOL – VOL – VOL –
z When you enter a double digit number
Depending on the TV set, you can also enter the
number as follows:
Press >10, then the number. (For example, press >10,
then 2 and 5 for entering 25.)
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
VOL +/–
./>