Sony DSC-P92 User Manual
Page 93
93
Tr
oub
lesh
oot
in
g
Others
You cannot format a
“Memory Stick.”
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
p Set it to the recording position (page 105).
You have formatted a
“Memory Stick” by
mistake.
• All the data on the “Memory Stick” are erased by
formatting.
p We recommend that you set the “Memory Stick” write-protect
switch to the LOCK position to protect accidental erasure
(page 105).
Symptom
Cause
Solution
The camera does not
work, no operations can
be performed.
• The battery level is low or zero (The
indicator appears.).
• The AC Adaptor (not supplied) is not connected
securely.
p Charge the batteries (page 10).
p Connect it securely to the DC IN jack of the camera and to a wall
outlet (wall socket) (page 15).
The power is on, but the
camera does not work.
• The internal system is not working properly.
p Remove, and then, after one minute, reinstall the batteries and
turn on the camera. If this does not work, press the RESET
button located inside the jack cover with a pointed object, then
turn the power on again. (This will clear the date and time
settings, etc.)
You cannot identify the
indicator on the LCD
screen.
—
p Check the indicator (pages 109 to 111).
The lens gets fogged.
• Condensation is occurring.
p Turn off the camera, leave the camera for about an hour and then
try to use it again (page 104).
The camera gets hot if you
use it for a long time.
—
p This is not a malfunction.
The lens does not move
when you turn off the
camera.
• The batteries are discharged.
p Replace them with charged batteries or use the AC Adaptor (not
Symptom
Cause
Solution