Sony DSC-P92 - Manual (Page 64)

64
h Select [OK] with B , then press
z .
The - mark turns white and the
selected image is protected.
To cancel the protection
In Step 4, select [Cancel], or in Step 8,
select [Exit].
To release protection
In Step 5, select an image for which you
want to release protection with v/V/b/B
and press z. The - mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU, select [OK], and press z.
To protect all the images in
folder
In Step 4, select [All In Folder], then press
z. Next, select [On], then press z.
To release protection of all the
images in the folder
In Step 4, select [All In Folder], and press
z. Then select [Off], and press z.
On the Index (triple-image)
screen
a Set the mode selector to ,
press the zoom W (index)
button twice to switch to the
Index (triple-image) screen.
b Move the image you want to
protect to the center with
b / B .
c Press MENU.
The menu appears.
d Select [Protect] with v / V , then
press z .
The center image is protected, and the
-
(Protect) mark is indicated on that
image.
e To protect other images, move
the image you want to protect
to the center with
b / B , and
repeat Step 4 .
To release protection
In Step 4, select the image from which
you want to release protection, and press z.
To release protection from all of your
images, repeat this process for each of them.
10:30 PM 2003 7 4 101-0002
Protect
DPOF
Folder
BACK/NEXT OK