Sony DSC-P92 User Manual

Page 91

oub

lesh

oot

Computers

The resizing function
does not work.

• Movie (MPEG movie)/Clip Motion/Multi Burst

files cannot be resized.

—

You cannot attach a print
(DPOF) mark.

• Print (DPOF) marks cannot be attached to movie

(MPEG movie)/Clip Motion files.

—

You cannot cut a movie.

• The movie is not long enough to cut.
• Protected movie (MPEG movie), Clip Motion,

Multi Burst files and still images cannot be cut.

—
—

Symptom

Cause

Solution

You do not know whether
or not your OS can be
used with the camera.

—

You cannot install the
USB driver.

—

p In Windows 2000, log on as Administrator (authorized

Administrators).

Your computer does not
recognize your camera.

• The camera is turned off.
• The battery level is too low.
• You are not using the supplied USB cable.
• The USB cable is not connected securely.

• [USB Connect] is set to [PTP] in the SET UP

settings.

• The USB connectors on your computer are

connected to other equipment besides the
keyboard, the mouse.

• The camera is not directly connected to your

computer.

• The USB driver is not installed.
• Your computer does not properly recognize the

device because you connected the camera and
your computer with the USB cable before you
installed the “USB Driver” from the supplied
CD-ROM.

p Turn on the camera (page 16).
p Use the AC Adaptor (not supplied) (page 15).
p Use the supplied USB cable (page 78).
p Disconnect the USB cable, and securely connect it again. Make

sure that “USB MODE” is displayed on the LCD screen
(page 78).

p Set it to [Normal] (page 103).

p Disconnect the USB cables except for those connected to the

keyboard and the mouse.

p Directly connect the camera and your computer without using a

USB hub.

p Install the USB driver (page 75).
p Delete the erroneously recognized device from your computer,

then install the USB driver (pages 75, 80).

Symptom

Cause

Solution