Sony ICD-BP150 - Manual (Page 37)

Other Functions
37 GB
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back. ( If “B-ONLY” was selected in Step 6, only
the alarm will sound.)
When the playback ends, the unit will stop automatically at the beginning
of that message.
To listen to the same message again
Press NxPLAY/STOP. The same message will be played back from the
beginning.
To stop the alarm before the playback starts
Press xSTOP while the alarm sound is heard. You can stop even when the
HOLD function is activated.
To cancel the alarm setting
Press . or > to flash “OFF” in Step 3 on page 35 and press
Nx
PLAY/STOP.
To change the alarm date and time
Follow Steps 1 to 3 on page 35. When the alarm date is displayed, follow
Steps 4 to 7 on page 36 to change the alarm date and time.
Notes
• If you try to set the alarm to play back a message at a previously set time on
another message, “PRE SET” will be displayed, preventing new settings.
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the timer recording start time comes during alarm playback, the playback
stops and the timer recording will start.
• If the alarm time comes during recording, alarm will sound after the
recording is finished and “,” will flash.
• If more than one alarm time comes during recording, only the first message
will be played back.
• When the alarm time comes when the unit is in the menu mode, alarm will
sound and the menu mode will be cancelled.
• If you erase the message you set the alarm to play back, the alarm setting will
be cancelled.
• If you add an index to the message you set the alarm to play back, playback
will stop at the index.
• If you erase the index on the message you set the alarm to play back, the alarm
setting will be cancelled.
• You can adjust the playback volume with the VOL control.
• If the alarm time comes during erasing, alarm will sound for 10 seconds after
the erasing is finished and playback begins.
• Alarm setting will not be cancelled when the alarm playback finishes. To
cancel alarm setting, see above.