Sony MVC-FD92 User Manual
Page 81
masterpage:Right
filename[D:\WORKS\Mavica kaihan\3066742121\3066742121MVCFD92UC\02GB-
MVCFD92UC\09add.fm]
81
model name1[MVC-FD92]
[3-066-742-12(1)]
Ad
diti
onal
inf
orma
tion
5
Open “Device Manager” on Windows.
6
After the message appears to verify that you delete the device
manager, click the [OK] button.
7
Turn off the camera, disconnect the USB cable, and restart the
computer.
8
Install the USB driver in the supplied CD-ROM to the computer
following the procedure on page 29. Perform all steps without
skipping.
Battery packs
Symptom
Cause and/or Solution
The battery pack cannot
be charged.
•
The power of the camera is turned on.
t
Turn off the power of the camera (page 10).
The battery life is short.
•
You are recording/playing back images under
extremely cold temperatures.
•
The battery pack is not charged enough.
t
Charge the battery pack fully.
•
The battery pack is dead.
t
Replace the battery pack with a new one.
For Windows 98, Windows 98SE and Windows Me users:
For Windows 2000 Professional users:
*
Log in with the permission of administrator.
1
Open [Control Panel] from [
My Computer], then double-click [System].
2
System properties is displayed. Click the [Device Manager] tab located at the
top.
3
Click [
SonyDSC] in [
Other devices], then click the [Delete (E)]
button located at the lower-right corner.
1
Open [Control Panel] from [
My Computer], then double-click [System].
2
System properties is displayed. Click the [Hardware] tab located at the top,
then click the [Device Manager (D)] button.
3
Click [View] in [Device Manager], then click [Devices by type (E)].
4
Right-click [
SonyDSC] in [
Other devices], then click [Delete (E)].
09add.fm Page 81 Wednesday, February 28, 2001 10:08 AM