Sony SLT-A99V - Manual (Page 56)

56
Attaching a lens
• When you want to shoot full-frame images, use a lens designed for a full-frame
camera.
• When you use a lens for which a tripod socket is provided, attach the lens onto the
tripod using the tripod socket provided to help balance the weight of the lens.
• When carrying the camera with a lens attached, hold both the camera and the lens
firmly.
• Do not hold the part of the lens that is extended for the zoom or focus adjustment.
To remove the lens
Note on changing the lens
When changing the lens, if dust or debris gets inside the camera and
adheres to the surface of the image sensor (the part that converts the light to
an electric signal), it may appear as dark spots on the image, depending on
the shooting environment.
The camera is equipped with an anti-dust function to prevent dust from
landing on the image sensor. However, quickly change the lens away from
dusty locations when attaching/removing a lens.
1
Press the lens release button all
the way in and turn the lens
counterclockwise until it stops.
Lens release button
2
Attach the caps to the front and
rear of the lens and the body cap
to the camera.
• Before you attach them, remove dust
from them.