Sony DSC-M2 - Manual (Page 73)

73
Us
in
g y
o
u
r c
o
m
pute
r
Perform the procedures listed below
beforehand when:
• Disconnecting the USB cable
• Removing a “Memory Stick Duo”
• Turning off the camera
Drag and drop the drive icon or the
icon of the “Memory Stick Duo” to
the “Trash” icon.
The camera is disconnected from the
computer.
• If using Mac OS X v10.0, disconnect the USB
cable etc., after you have turned your computer
off.
You can change the Music files that are
preset at the factory with the desired Music
file. Also, you can add these files.
The music you can transfer with “Music
Transfer” is listed below:
• MP3 files stored on the hard drive of your
computer
• Music on CDs
• Preset-music saved on this camera
To install “Music Transfer”
• Shut down all other application software before
you install “Music Transfer”.
• For installation, you need to log on as
administer.
1 Turn on your Macitosh, and insert the CD-
ROM (supplied) into the CD-ROM drive.
2 Double-click (PICTUREPACKAGE).
3 Double-click the [MusicTransfer.pkg] file
in the [MAC] folder.
4 The installation of the software starts.
To add/change Music files
See “Adding/Changing Music using ‘Music
Transfer’” in page 71.
• When you want to use the preset Music again,
we recommend that you excute [Format Music]
(page 57) first.
• For details on using “Music Transfer,” see the
on-line help in “Music Transfer”.
To delete the USB connection
Adding/Changing music using
“Music Transfer”
Technical support for “Music Transfer”
is provided by the Pixela User
Support Center. For more informaion,
refer to the leaflet in the supplied CD-
ROM package.