AT&T E5908 - Manual (Page 30)

26
Directories
1 DIR
DIRECTORY
2 ^
ADAM
5551234
3 SELECT
SPEED EDIT ERASE
5551234
^
SPEED EDIT ERASE
5551234
^
SPEED EDIT ERASE
5551234
To copy, edit or delete an entry
You can make existing directory entries Speed Dial entries
if they are stored in the handset. You can also change
names, numbers and the distinctive ringing settings, or
erase entries, that are stored in the cordless handset or the
base. When any entry is displayed, press
SELECT
to see
the options. Press ^ or V to highlight the option you
want (blinking text), then press
SELECT
.
To make an entry a Speed Dial entry (cordless
handset only)
When
SPEED
is blinking, press
SELECT
, then dial a
memory location (1-9) to make this entry a Speed Dial
entry.
If you choose a memory location that is already
assigned to a different entry in the directory, that entry
will remain in the directory, but will not have a SPEED
DIAL location.
To edit an entry
Press
^ until
EDIT
is blinking, then press
SELECT
.
You can change the name and number (or distinct ring
setting on the cordless handset) by following the steps
described on pages 23-24.
To delete an entry
Press
^ until
ERASE
is blinking, then press
SELECT
to
display a confirmation screen (
ERASE NO YES
).
To delete the entry, press ^ to highlight
YES
, then
press
SELECT
.
To abort the procedure and leave the entry intact,
press
V to highlight NO, then press
SELECT
.
Press SELECT to
choose blinking option
on the handset.
NOTE: Screens shown
above are displayed on the
cordless handset. The base
display is slightly different, but
the procedure is the same.
NOTE: At the base,
when you need to place a call
on the handset, you can also
lift the corded handset first,
and then find the directory
entry you want and press
DISP DIAL
.
91-000646-010-000_E5908_R11.qxd 10/01/2006 6:10 PM Page 26