Sony PEG-NX80V - Manual (Page 67)

Exchanging and updating files/data using the HotSync
®
operation 67
Performing the HotSync
®
operation
Note
Do not remove your CLIÉ handheld from the cradle until the
HotSync
®
operation is complete. Also, do not insert or remove
“Memory Stick” media or CF card while the HotSync
®
operation
is being performed. Otherwise, the Palm™ Desktop for CLIÉ
software may not finish normally.
If the HotSync
®
operation does not start
Make sure that the HotSync icon is displayed in the
Windows task tray.
If the HotSync
icon is not displayed in the task tray, click
Start, select Programs (for Windows XP, select All
Programs), Sony Handheld, and click HotSync
Manager. Check that the HotSync
icon is displayed in the
task tray and press the HotSync button on the cradle to start
the HotSync
®
operation.
The message is displayed on your computer screen when the
HotSync
®
operation starts.
* From this point onwards, where Windows XP Home Edition and
Windows XP Professional are common, they will both be referred to
as Windows XP.
Tip
If you cannot perform a HotSync
®
operation
Refer to the “Troubleshooting Q&A.”