Sony PEG-NX80V - Manual (Page 66)

Exchanging and updating files/data using the HotSync
®
operation 66
Performing the HotSync
®
operation
To perform the HotSync
®
operation, the Palm™ Desktop for
CLIÉ software must be installed on your computer and the cradle
should be connected to the computer.
b
For details on the HotSync
®
operation, refer to “Using your
CLIÉ™ handheld with your computer” in the “Read This First
(Operating Instructions).”
Performing the HotSync
®
operation with the cradle
(Local HotSync
®
)
Performing the HotSync
®
operation with the cradle is called a
Local HotSync
®
.
1 Place your CLIÉ handheld in the cradle.
2 Press the HotSync button on the cradle.
The HotSync
®
operation starts.
When the HotSync
®
operation is complete, a message
showing the HotSync
®
completion is displayed on your
CLIÉ handheld.
(Location of the HotSync
button may vary
depending on your
model.)
Continued on next page
• • • • • • • • • • • • • • • • • • •