Sony DSC-T300 - Manual (Page 57)

57
U
si
ng the s
hoot
ing
func
tio
ns
Shooting menu For details on the operation 1 page 38
About scenes that are recognized
The following scenes are recognized. The camera identifies the optimal scene and displays
each mark.
When the shutter button is pressed halfway down while a mark is displayed, the mark color
turns green and Scene Recognition is confirmed.
• Scene Recognition does not function in the following situations.
– When shooting in Close focus enabled mode
– During burst shooting
– When using digital zoom
• In (Easy Shooting) mode, [Scene Recognition] is fixed to [Auto]. However, the current setting
mark and the Scene Recognition mark do not appear.
• The flash is set to (Flash Auto) or (Flash forced off).
• When Face Detection function is set to [When touched], the default setting for Face Detection is set to
[Auto] if Scene Recognition is set to anything other than [Off] before the screen is touched.
• (Twilight using a tripod) scenes sometimes cannot be recognized in an environment where vibrations
are transferred to the camera even though it is fixed on a tripod.
• Sometimes a slow shutter results when a scene is recognized as a ( Twilight using a tripod). Make
sure to keep the camera still during shooting.
• The current setting mark and Scene Recognition mark are displayed regardless of the screen display
settings (page 21).
• Sometimes these scenes may not be recognized depending on the situation.
Manually adjusts the exposure. This menu is the same as the menu that appears when you
touch the EV setting button in
(Program Auto) mode. See page 51.
Selects the metering mode that sets which part of the subject to measure to determine the
exposure. This menu is the same as the menu that appears when you touch the Metering Mode
setting button in
(Program Auto) mode. See page 49.
Twilight
Twilight Portrait
Twilight using a tripod
Backlight
Backlight Portrait
EV: Adjusting the light intensity
Metering Mode: Selecting the metering mode