ADC Megabit Modem 700F User Manual
Page 88
Maintenance
78
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Access the
General System
page to configure the TFTP parameters.
Reference the following table for a description of the TFTP parameters.
1
From the
system
menu, click
general
to open the General System window.
2
Enter the
TFTP Server IP address
.
3
Enter the
TFTP Server Net Mask
(subnet mask) for the TFTP server.
4
Enter the
File Path
where the updated software resides on the TFTP server (if necessary).
5
Enter the
File Name
of the updated software file.
Information
Description
IP Address
The four octet address of the TFTP server (example: 192.168.0.3).
Net Mask
The subnet mask of the TFTP server (example: 255.255.255.0).
File Path
The path on the TFTP server where the updated software is located. This may or may
not be required depending on the TFTP server configuration. (Example:
c:\download\)
File Name
The full name of the updated software (example: tiger.bin).