Mac e, Onfiguring, Tatic – ADC Megabit Modem 700F User Manual
Page 52: Ntries
Configuring Static MAC Entries
42
Megabit Modem 400F, 500L, 600F, and 700F User Manual
C
ONFIGURING
S
TATIC
MAC E
NTRIES
When the modem's mode of operation is Bridge/Router RFC 1483 and the modem is configured
as a bridge, the modem forwards Ethernet frames based on MAC addresses. Up to 32 static
MAC entries can be added to the modem bridge MAC addres table.
Display Static MAC Entries
1
From the system menu, click static MAC table to open the Static MAC Table window.
2
Observe the list of MAC addresses.
Add a Static MAC Entry
1
From the
system
menu, click
static MAC table
to open the Static MAC Table window.
2
Click
Add
to display the Static MAC Address Entry window.
3
Configure the MAC Address parameters as defined above.
4
Click
Apply
to add the new data to the list.
Modify a Static MAC Entry
1
From the
system
menu, click
static MAC table
to open the Static MAC Table window.
2
Click
Select
of the address to be changed.
Information
Description
MAC Address
The hardware address of a device.
Source Port
The port receiving the frame.
Destination Port
The port that the traffic will be forwarded out of.