ADC Megabit Modem 700F - Manual (Page 49)

Chapter 5: Configuring System Settings
Megabit Modem 400F, 500L, 600F, and 700F User Manual 39
5 Enter the Trap Community String.
6 Enter the Read-Only Community String .
7 Enter the Read-Write Community String .
8 Click Apply to activate the changes.
Example
The illustration on the previous page shows the configuration for the modem to be managed
remotely by a trap server located at 192.168.0.3 using a net mask of 255.255.255.0. In order for
the modem to communicate with the trap server, both the modem and trap server must use the
same community strings: trap community string set to
trapit , read-only community string set to
readit , and read-write community string set to writeit .