Pc t, Etting, Onfigure – ADC Megabit Modem 700F User Manual
Page 34: Odem
Setting Up the PC To Configure the Modem
24
Megabit Modem 400F, 500L, 600F, and 700F User Manual
S
ETTING
U
P
THE
PC T
O
C
ONFIGURE
THE
M
ODEM
Set up your PC to be on the same IP subnet as the modem. Since the modem default uses DHCP,
it will automatically configure your IP settings once you set up that option. If you want to view
or change the default IP address for the modem, see
“Using the RS-232 Management Port” on
page 80
.
The following is an example of how to set up a PC running Microsoft Windows 98.
1
Open the
Control Panel
then double-click the
Network
icon.
2
From the Configuration tab, double-click
TCP/IP
.
3
If DHCP has been enabled on the modem (default), select
Obtain an IP
address automatically
and skip to step 5. Otherwise, select
Specify an IP address
.
4
Enter
IP Address
and
Subnet Mask.
The default LAN IP address is 192.168.0.1. Use an IP
address from the following range: 192.168.0.2 to 192.168.0.254. The default subnet mask
is 255.255.255.0.
5
Click
OK
to close the TCP/IP Properties window.
6
Click
OK
to close the Network window.
7
Click
OK
to restart the computer.