ADC Megabit Modem 700F User Manual
Page 47
Chapter 5: Configuring System Settings
Megabit Modem 400F, 500L, 600F, and 700F User Manual
37
1
From the
system
menu,
click
general
to open the
General System window.
2
Enter the
TFTP Server IP
address
for the device that
will be the TFTP server.
3
Enter the
TFTP Server Net
Mask
(subnet mask) for
the TFTP server.
4
Enter the
TFTP Server File
Path
where the updated
software resides on the
TFTP server (leave blank
if the file is stored in the
root shared folder on the
TFTP server).
5
Enter the
TFTP Server File Name
of the updated software file.
6
Click
Apply
to activate the changes.
Example
The illustration above shows the configuration to access a TFTP server with IP address
192.168.0.2 using a subnet mask of 255.255.255.0. The TFTP server has been set up so that
“tiger.bin” has been placed directly inside the shared directory (not in a subdirectory of the
shared directory). Therefore, the File Path should be left blank.