Onfiguring, Tatic, Outes – ADC Megabit Modem 700F User Manual
Page 54
Configuring Static Routes
44
Megabit Modem 400F, 500L, 600F, and 700F User Manual
C
ONFIGURING
S
TATIC
R
OUTES
Display Static Routes
1
From the system menu, click static route table to open the Static Route Table window.
2
Observe the list of static routes.
Add a Static Route
1
From the
system
menu, click
static route table
to open the Static Route Table window.
2
Click
Add
to display the Static Route Entry window.
3
Configure the static route parameters as defined above.
4
Click
Apply
to add the new data to the list.
Modify a Static Route
1
From the
system
menu, click
static route table
to open the Static Route Table window.
2
Click
Select
of the route to be changed.
3
Configure the static route parameters as defined above.
4
Click
OK
to change the existing data to the list.
Information
Description
Destination
The destination IP address of the packet.
Net Mask
The destination subnet mask of the packet.
Gateway
The next hop IP address the packet will be forwarded to.