Using optional equipment, Additional information when connecting equipment, Select and view the input signal – Sony KP-41PX1 User Manual

Page 26

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the D or E socket using a scart lead. If you do not have a scart lead, use the “Manually
Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”.
If your video supports Smartlink please refer the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment

1 To listen to the audio of your projection TV on the Hi-Fi equipment:

Plug in your Dolby Prologic system decoder amplifier to the B sockets on the rear of the projection TV if you wish to amplify
the audio output from the TV.
The output level from B sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound”
section of this instruction manual to adjust the volume of the headphones.

To enjoy “Dolby Virtual” sound effect through
your Hi-Fi equipment:
Place the speakers of your equipment in front of
your sitting place and besides the TV set but
keeping a distance of 50 cm from each speaker to
the TV set.
Then by using the menu system, select the menu “Sound
Control” and set “Dolby Virtual” to “On”.

2 To listen to the Dolby amplifier equipment on the projection TV speakers:

Plug in your Hi-Fi equipment to the A socket on the rear of the projection TV
if you wish to listen to the audio output from your Hi-Fi on the projection TV
speaker. If you have a Dolby amplifier, connect the centre output from your amplifier
to the A socket to use the projection TV as a centre speaker. Refer to the “Adjusting the Sound”
section of this instruction manual and set the option "Speaker" to "Centre in".

For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the

2 input signal using the instructions on

this page below.

Select and View the Input Signal

Optional Connections

Optional Connections

Using Optional Equipment

Connect your equipment to the designated projection TV socket, as it is indicated on the
previous page.

Switch on the connected equipment.

Press the

button repeatedly on your remote control until the correct input symbol

appears on the screen.

Symbol

Input signals

• Audio/video input signal through the Euro AV connector C

• RGB input signal through the Euro AV connector C

• Audio/Video input signal through the Euro AV connector D or the

phono sockets H and G.

• Audio/S Video input signal through the Euro AV connector D or the

sockets H and F.

…

• Audio/Video input signal through the Euro AV connector E.

To return to the normal TV picture, press the

button on the remote control.

RM 892

PROGR

VIDEO

Right Hi-Fi
Speaker

Left Hi-Fi
Speaker

Your sitting position

~50º

01GB.fm Page 27 Monday, June 4, 2001 3:47 PM