Karcher HKS 100 LM - Manual (Page 24)

- 10
The nozzle size is marked on the key sur-
face of the nozzle. o = possible
x = installed as part of the series
Note: The chart shows the interior cleaners
with the order no. 3.632-030 and 3.632-
032. The interior cleaners with the order no.
3.632-035 and 3.632-049 do not have a
counter weight and no protective cap.
1 Counterweight
2 Protective cover
3 Frame

Only for appliances order nos. 3.632-
030 and 3.632-032: Screw the counter-
weight onto the interior cleaner.
 Screw cleaning head to the hose or the
frame (frames: see accessories).
The speed of the interior cleaner depends
on:
– Spray pressure
– Temperature
– Regulator fluid
Note: A change of the regulator screw by
30 to 60° is usually enough to adjust the
speed. With high speed small or lightly
soiled containers are cleaned, low speed is
used to clean large and heavily soiled con-
tainers.
A Regulator screw

Increasing the speed: Turn the regula-
tor screw in an anticlockwise direction.
 Reducing speed: Turn the regulator
screw in a clockwise direction.
Adjusting the height of the cover:

Release fastening toggle.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Adjusting the height of the cover:

Loosen the fastening toggle for height
adjustment.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Tilt the interior cleaner:

Loosen the fastening toggle for tilting.
 Set the inclination (±15°) of the interior
cleaner.
 Tighten the fastening toggle.
Selecting the nozzle
Flow volume [l/h] Pressure [MPa] Number of noz-
zles
Nozzle size
[mm]
Order No.
3.632-030 3.632-032 3.632-035 3.632-049
3000 5 4 1,8 4.765-007 o o o o
3000 5 2 2,4 5.765-007 o o x x
3000 6 4 1,65 5.765-082 o o -- --
3000 5 2 2,7 4.765-006 x x -- --
3000 8 2 2,5 5.765-018 o o -- --
3800 5 2 2,9 5.765-025 o o -- --
3800 8 2 2,7 4.765-006 x x -- --
6000 5 2 3,8 4.765-008 o o -- --
6000 8 2 3,5 5.768-075 o o -- --
Start up
Adjust speed
Cover with frame
Swivel frame
24 EN