Karcher SB V1 Eco - Manual (Page 28)

– 13
Î Install the hose recovery according to
the enclosed assembling instructions.
Î Remove the screw on the upper side of
the covering hood of the cable.
Î Remove covering hood.
Î Set the recovery force.
– Increase the force: Turn the hand-
wheel in clockwise direction (+).
– Reducing the force: Turn the hand-
wheel in an anticlockwise direction (-).
Î Replace the covering hood and tighten
the screws.
Î Establish the electrical connection.
Î Check functioning of the appliance.
Î Set the vacuum cleaning time accord-
ing to customer requirements.
Î Connect the cable that you have al-
ready guided through the base plate
opening to the main appliance switch
according to the enclosed circuit plan.
Install hose recovery (optional)
Setting the recovery force of the cable
Start up
28 EN