Axis Communications 2401 - Manual (Page 10)

Installing on a Network AXIS 2400/2401 Admin Manual 10
Verifying and Completing the Installation From Your Browser
Important!
• Upon delivery, the AXIS 2400/01 is configured for open access (anonymous users). The unit is sup-
plied with one pre-configured Administrator username and password, set to root and pass, respec-
tively. The Administrator password must be changed immediately to prevent unauthorized access to
the Admin Tools and/or product images, as defined in the Security Settings.
• To enable the updating of images in Microsoft Internet Explorer, set your browser to allow ActiveX
controls and perform a once-only installation of Axis' ActiveX component onto your workstation. If
your working environment restricts or prohibits the downloading of additional software components,
you can alternatively, from the Image Settings, configure your AXIS 2400/01to use a Java applet for
updating the images. Refer to the online Help for more information.
❼ Exit ping. The installation is now complete, and you are ready to
access the AXIS 2400/2401 from your browser, as described in the
next section.
Power Supply
Connector
❺ Connect the power supply to the unit and connect
it to your main power supply.
❻ Approximately 10-15 seconds after connecting
the power supply, the message ‘
Reply from
172.21.1.200...
’ - or similar, is returned
within the window. Ensure that the Power Indica-
tor is permanently lit and that the Network Indi-
cator flashes intermittently.
Network Indicator
Power Indicator
❶ Start your browser and enter the IP address of the
AXIS 2400/2401 in the location/address field.
❷ Click the Installation Wizard. The wizard guides
you through the remaining installation procedures.