elektraLite MY 250I - Manual (Page 17)

16
b) Editing via the external controller
Call up the first scene in your controller now.
1. Select
“SC01” by pressing [UP] button.
2. Press [ENTER], the display shows “SC01”.
3. Press [ENTER], the display shows “C-01”.
4. Select "CNIN" by pressing [UP].
5. Press [ENTER], the display shows "OFF".
6. Press [UP], the display shows "ON".
7. Press [ENTER], the display shows "SC02". You successfully downloaded the first scene.
8. Adjust the Step-time as described above under point 12.
9. Call up the second scene in your controller now.
10. Repeat steps 5-11 until all desired scenes are downloaded.
11. Press
[EXIT/DN] to exit. The number of steps can be defined under “STEP” and the scenes can be called
up under “RUN”