Nikon D3S - Manual (Page 226)

200
t
Two-Button Reset: Restoring
Default Settings
The camera settings listed below can be
restored to default values by holding the ISO
and WB buttons down together for more
than two seconds (these buttons are
marked by a green dot). The control panels
turn off briefly while settings are reset.
1 Custom Setting f6 (Assign AE-L/AF-L button, 0 321) is unaffected.
2 Number of shots is reset to zero. Bracketing increment is reset to 1EV
(exposure/flash bracketing) or 1 (white balance bracketing). Y Auto is
selected for the second shot of two-shot ADL bracketing programs.
3 If multiple exposure is currently in progress, shooting will end and multiple
exposure will be created from exposures recorded to that point. Gain and
number of shots are not reset.
ISO
button
WB
button
Option Default
Focus point Center
Exposure mode
Programmed
auto
Flexible program Off
Exposure
compensation
Off
AE lock hold Off 1
Aperture lock Off
Shutter-speed
lock
Off
Bracketing Off 2
Flash mode
Front-curtain
sync
FV lock Off
Multiple
exposure
Off 3
Option Default