Nikon Coolpix L110 - Manual (Page 67)

55
Auto Mode
More on
Sh
ooting
C Continuous
Change settings to Continuous or BSS (best shot selector).
Flash will be switched off for
Continuous, BSS or Multi-shot 16, and focus, exposure
and white balance are fixed at the values for the first picture in each series.
The icon for the current setting is displayed in the monitor during shooting (
A 8).
When set to
Single, no icon is displayed.
Set to A (auto) mode (A 48) M d (Shooting menu) M C Continuous
U Single (default setting)
One shot is taken each time shutter-release button is pressed.
V Continuous
While the shutter-release button is held all the way down, up to 4 pictures are taken at
a rate of about 1.0 frames per second (fps) when image mode is set to I
4000×3000.
D BSS (Best Shot Selector)
The “best shot selector” is recommended when shooting with the flash off or the
camera zoomed in, or in other situations in which inadvertent motion can result in
blurred images.
When BSS is on, the camera takes up to 10 pictures while the shutter-release button
is held all the way down. The sharpest image in the series is automatically selected
and saved.
W Multi-shot 16
Each time the shutter-release button is pressed all the way down,
the camera takes 16 shots at a rate of about 7.4 frames per
second (fps), then arranges them in a single image. Images are
captured with the image mode locked at L
2560×1920.
• Digital zoom cannot be used.
B
Note on Continuous Shooting
• The frame rate with continuous shooting may vary, depending upon the current image mode
setting, the memory card used, and the shooting environment.
• This feature cannot be used simultaneously with certain features. ➝ “Camera Settings that Cannot
Be Set at the Same Time” ( A 58)
B
Note on BSS
BSS is best suited to shooting subjects that are not moving. When shooting moving subjects or when
the composition of the picture changes while shooting, the desired results may not be achieved.
B
Note on Multi-shot 16
Smear ( A 121) visible in the monitor when shooting with Multi-shot 16 will be visible in the saved
image data. To reduce smear effects, avoid bright objects such as the sun, reflections of the sun, and
electric lights when shooting.