Nikon 4500 - Manual (Page 45)

35
Connections—Connecting to a Computer
2 Connect the camera and computer
Connect the UC-E1 USB cable as shown below. Use the flat connector for
connection to the computer, and connect the other end of the cable to the
camera’s USB connector. Do not connect the camera via a USB hub or
keyboard.
Before Connecting the Camera
Be sure to install Nikon View 5 before connecting your camera.
Use a Reliable Power Source
When transferring data between the camera and the computer, be sure that
the battery is fully charged. If in doubt, recharge the battery before begin-
ning transfer or use the optional EH-21 AC adapter/battery charger or EH-53
AC adapter.
ISO
3 Turn the camera on
Turn the camera on. Nikon View
5 will detect the camera and start
automatically. For details, see the
Nikon View 5 Reference Manual
(on CD). While the UC-E1 USB
cable is connected, the camera
monitor will remain off, and all
controls except the power switch
will be inactive.