Varying settings automatically: auto bracketing – Nikon 4500 User Manual
Page 126

116
Menu Guide—The Shooting Menu
Varying Settings Automatically: Auto Bracketing
In some situations, you may find it difficult to se-
lect appropriate exposure-compensation and
white-balance settings, and yet not have time to
check the results and adjust settings after each
shot. Auto bracketing can be used to vary these
settings automatically over a series of photographs,
“bracketing” a selected exposure-compensation
or white-balance setting.
Off
Select Off to restore normal exposure and white balance.
On
The camera varies exposure with each shot; the
number of shots in each sequence and the amount
of exposure compensation performed are selected
from the sub-menu shown at right. Bracketing is
performed by varying shutter speed (A and M
modes), aperture (S mode), or shutter speed and
aperture (P mode). No bracketing is performed if
the amount of exposure compensation would ex-
ceed the limits of the camera’s exposure system.
Bracketing order
Exposure increment
No. of shots
0, +0.3, –0.3
±
1
/
3
EV
0, +0.7, –0.7
±
2
/
3
EV
3, ±0.7
3
0, +1.0, –1.0
±1 EV
3, ±1.0
3
0, +0.7, +0.3, –0.3, –0.7
±
1
/
3
EV
5, ±0.3
5
0, +1.3, +0.7, –0.7, –1.3
±
2
/
3
EV
5, ±0.7
5
0, +2.0, +1.0, –1.0, –2.0
±1 EV
5, ±1.0
5
3, ±0.3
3
Option