Nikon S9400 - S9500 - Manual (Page 72)

50
Features That Can Be Set Using the Multi Selector
Shoot
ing Features
Using the Flash (Flash Modes)
You can set a flash mode that suits the shooting conditions.
1
Press
H (m flash mode) on the multi selector.
2
Press the multi selector to select the desired
mode and press the
k button.
• See “Available Flash Modes” ( A51) for more
information.
• If the k button is not pressed within a few seconds,
the selection will be canceled.
• When U (auto) is applied, D is only displayed for
a few seconds regardless of Photo info settings
(
A96).
3
Frame the subject and shoot.
• The flash lamp indicates the status of the flash when
you press the shutter-release button halfway.
- On: The flash will fire when you press the shutter-
release button all the way.
- Flashing: The flash is charging. The camera cannot
take pictures.
- Off: The flash will not fire when a picture is taken.
• If the battery is low, the monitor will be turned off
while the flash is charging.
Auto