beautypg.com

Connecting the camera to a printer (direct print), Connecting the camera to a printer – Nikon P520 User Manual

Page 143

background image

E19

Re
fe

re

nce

S

e

ct

io

n

Connecting the Camera to a Printer (Direct Print)

Users of PictBridge-compatible (

F22) printers can connect the camera directly to

the printer and print pictures without using a computer.

Connecting the Camera to a Printer

1

Turn off the camera.

2

Turn on the printer.

Check the printer settings.

3

Connect the camera to the printer using the included USB cable.

Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull

the plug at an angle.

4

The camera is automatically turned on.

When connected correctly, the PictBridge startup screen (1) is displayed on the

monitor screen of the camera. Then the Print selection screen (2) is displayed.

B

If the PictBridge Startup Screen Is Not Displayed

Turn the camera off and disconnect the USB cable. Set the Charge by computer option (

E76) in

the camera’s setup menu to Off and reconnect the cable.

B

Notes on Power Source

When connecting the camera to a printer, use a fully charged battery to prevent the camera from

turning off unexpectedly.

If the AC Adapter EH-62A (available separately) (

E92) is used, the COOLPIX P520 can be powered

from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62A.
Failure to observe this precaution could result in overheating or damage to the camera.

32

32

NO.

2013

15/05

Print selection