Nikon D200 - Manual (Page 26)

16
In
tr
oduc
tion—F
irst Steps
Adjusting Viewfi nder Focus
Photographs are framed in the viewfi nder. Before shooting, make sure that the
display in the viewfi nder is in clear focus.
1 Remove the lens cap and turn the camera on.
2 Rotate the diopter adjustment control until the
focus brackets are displayed in sharp focus when
the shutter-release button is pressed halfway.
When operating the diopter adjustment control
with your eye to the viewfi nder, be careful not to
put your fi ngers or fi ngernails in your eye.
Focus
brackets
At default settings, the viewfi nder display and the aperture and shutter-speed indicators
in the control panel will turn off if no operations are performed for about six seconds
(auto meter-off ), reducing the drain on the battery. Press the shutter-release button
halfway to reactivate the display.
Auto Meter-Off