Nikon D200 User Manual

Page 168

158

Cu
stom S

ettings

etup

Custom Setting d1: Beep

Controls the pitch of the beep that sounds when the self-
timer is counting down or the camera focuses in single-
servo AF with Focus (the default setting) selected for Cus-
tom Setting a2 (AF-S Mode Priority). Choose from High
(the default option), Low, and Oﬀ .

A icon appears in the control panel when High or Low
is selected.

Custom Setting d2: Viewﬁ nder Grid Display

Select On to display on-demand grid lines in the view-
ﬁ nder (

6). The default option is Oﬀ .

Custom Setting d3: Viewﬁ nder Warning Display

Select On (the default option) to display a warning in the
viewﬁ nder when the battery is low, no memory card is in-
serted, or when shooting in black-and-white. No warning
is displayed when Oﬀ is selected; before shooting, check
indicators in the control panel.

Custom Setting d4: CL-Mode Shooting Speed

This option determines the rate at which photographs
can be taken in C

(continuous low-speed) mode (during

interval timer photography, this setting also determines
the frame advance rate for single-frame and mirror-up
modes). Shooting speed can be set to values between
1 and 4 frames per second (fps); the default value is 3 fps.
The frame advance rate may drop at slow shutter speeds.

Custom Setting d5: Exposure Delay Mode

Select On to delay shutter release until about 0.4 s after
the shutter-release button is pressed, reducing camera
shake in situations in which the least camera movement
could result in blurred photographs (for example, micro-
scope photography). The default option is Oﬀ .