Nikon D200 - Manual (Page 182)

172
Cu
stom S
ettings
S
etup
Custom Setting f6: Setting Method for Buttons and Dials
This option allows adjustments that are normally made by
pressing the
, , , , ISO, QUAL, or WB button and
rotating a command dial to be made by rotating the com-
mand dial after the button is released.
Option Description
Default
(default) Changes to settings made by rotating command dial while button is held
down.
Hold
Settings can be changed by rotating command dial after button is released. To
exit, press button again, press shutter-release button halfway, or (except when
No Limit is selected for Custom Setting c3 or optional AC adapter is used) wait
for about 20 s.
Custom Setting f7: Disable Shutter If No Memory Card
This option can be used to enable the shutter re lease
when no memory card is inserted in the cam era. Note
that when photographs are being cap tured to a computer
using Nikon Capture 4 Cam era Control, pho to graphs are
not recorded to the cam era mem o ry card and the shutter
release will be en abled re gard less of the setting chosen
for this option.
Option Description
Release Locked
(default)
Shutter-release button disabled when no memory card is inserted.
Enable Release
Shutter-release button enabled when no memory card is inserted.
Photographs taken when no memory card is inserted are not saved,
although they will be displayed in monitor.