Alliance Laundry Systems TMB1276C - Manual (Page 23)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21 70444801
Programming UniLinc
System Menu
The System Menu allows the user to access: cycle
programming, diagnostics and laundry management.
While on the Cycle Menu press and hold ,
then , then to enter the System Menu.
The System Menu is a submenu of the Cycle Menu.
The navigation of the System Menu is different from
the Cycle Menu. In the Cycle Menu, the highlighted
text box was stationary. In the System Menu, the
ARROW keypads control the location of the
highlighted text box. Text will remain at the same
location but the highlighted box will move when the
, , , and keypads are pressed.
Press the keypad to enter selected menu.
Press the keypad to return to the Cycle Menu
screen.
Save Changes Menu
The Save Changes Menu is used to confirm
programming changes when modifying a cycle or the
values of the Global Settings. The Save Changes
Menu will default to Yes. Using
the
or keypad will move the cursor
between Yes or No. Press the keypad to make a
selection. Once the keypad is pressed, the
display will either return to the Modify Cycle Menu or
the Global Setup Menu depending in which submenu
the display was in.
TMB1312R
Figure 22
Laundry
Management
System Menu
Diagnostic Program
PHM1021R
Figure 23
Save Changes?
No Yes