Axis Communications LBP 5200 User Manual
Page 39
Connecting to a Computer
1-16
Bef
ore
Y
ou Star
t Using
This Pr
inter
1
NOTE
If you are connecting the printer to a 100BASE-TX Ethernet network, all of the hubs, LAN
cables, computer network boards and other devices connected to the LAN will need to
support 100BASE-TX. For further details, please inquire at the store where you
purchased the printer.
1
Connect the LAN cable to the LAN socket in the network
board.
Make sure to use a LAN cable that is compatible with the LAN socket on the
network board as appropriate for the network you are using.
2
Connect the other end of the LAN cable to a hub.