Acer AIR-204 - Manual (Page 50)

7-9 User Guide for AIR-104/AIR-204
show tcp statistics
Example:
AIR 101> show tcp statistics
Received Sent
----------------------------------------------------------------------------------------------------------
Total Packets 508 577
Show udp statistics
Example:
AIR 101> show udp statistics
Received Delivered
-----------------------------------------------------------------------------------------------------------
Total datagrams 9 0
Datagrams with checksum error 0
Datagrams with incorrect length 0
Datagrams dropped due to buffer full 0
Datagrams with dest. port unreachable 0
Note: Multi-connection IP (MIP) Commands: Multi-connection IP (MIP) is the
technology used to combine two Internet accounts to work together to provide increased
bandwidth to the Internet. These commands allow the user to display information about
the MIP group.
show mip
Description: The profiles associated with the multi-connection IP group are displayed,
along with the current operational setting of the MIP group.
show mip statistics
Description: The statistics associated with the multi-connection IP group are displayed.
Port Commands
Port related commands are available for clearing statistical counters, enabling/disabling
ports, and displaying port configuration and statistics.
clear port statistics port 1
clear port statistics port 2
Description: This command clears port statistics. If a port is not specified, the statistics
counters on all ports are cleared.
enable/disable port 1
enable/disable port 2
Description: This command enables or disables a port.
Chapter 7 Command Line Interface