Spektrum SPM20310 DX3.0 - Manual (Page 17)

1
Auxiliary
Channel 3
Function
Select
(System Mode)
continued
Accessing the Auxiliary Channel 3 Function
LN = Linear servo movement
2P = 2-position servo movement
0 = Inhibited (Grip Dial A Braking is now activated)
1. Press the SCROLL and CHANNEL keys at the same time and hold.
2. Turn on the transmitter power switch to enter the System Mode.
3. Press the
SCROLL key until “AUX” appears on the screen.
4. Press the INCREASE or DECREASE key to select the correct Auxiliary Channel 3
function type to be used.
5. Press the SCROLL key to access the Grip Button C Select function.
6. To exit the System mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
The Grip Button C function of the DX3.0 allows you to select from 3 different functions
available. Use the information below to select the correct Grip Button C assignment for your
particular installation.
“0”: Off. (Default) If “AUX” is “2P”, then “2P” replaces “0” in this screen.
“Eb”: ESB (Emergency Steering Button). To cancel the “STG” regulation
for panic steering.
“LA”: Lap Timer.
Note: If “LA” or “Eb” is selected and “2P” is assigned to the Auxiliary
Channel 3 function, the Auxiliary Channel 3 function is moved to Grip Dial A (factory preset).
P = The 0 or off function, is the default setting and does not assign a function to Grip
Button C. If the Auxiliary Channel 3 function is set to “2P” or 2-position, “2P” will appear in
this screen in place of “0” and Grip Button C will function as the gear select button.
Grip Button C
Function
Select
(System Mode) GBC
0
GBC
Grip Button C
Function
Lap Timer
Grip Button C
Function
Grip Button C is inhibited
A