Mdi mdl – Spektrum SPM20310 DX3.0 User Manual

Page 14

To enter the System Mode, press both the

SCROLL and CHANNEL keys at the same time

while turning on the transmitter power switch. By pressing the

SCROLL key, you can now

choose Model Select, Model Name Input, Auxiliary Channel 3, Grip Button C function, Data

Reset ot the Model Copy function as shown here on the System Mode flow chart. Information

for each function is located on the page number listed next to the function name on the flow

chart.

To exit the System Mode, press the

SCROLL and CHANNEL keys at the same time, or

simply turn off the transmitter.

Note: If you turn the transmitter off and immediately enter System mode again, you

will be returned to the last System mode function used instead of the Model Select

function. While in System mode, there is no RF output generated by the transmitter.

adjustments can be performed with reduced battery power consumption. If you exit

System mode by pressing the

SCROLL and CHANNEL key at the same time, RF

output will not be enabled until you first turn off the transmitter.

Accessing the

System Mode

GBC

Grip Button C
Function
(Page 17)

MDI

MDL

clr

Model Select
(Page 15)

Data Reset
(Page 19)

–

- -

AUX

Model Name
Entry
(Page 15)

Auxiliary
Channel 3
Function
(Page 16)

CPY

Copy Model
Data
(Page 19)