Allied Telesis AT-MC14 - Manual (Page 35)

AT-MC13 and AT-MC14 Installation Guide
25
$
1 RFI Emission EN55022 Class B
$
2 Immunity EN55024
$
3 Warning: This product requires shielded cables to comply with emission
and immunity standards. If it is used with unshielded cables, the user may
be required to take measures to correct the interference problem at their
own expense.
$
4 Electrical Safety TUV-EN60950, UL60950 (UL/cUL)
Safety
$
5 Power to the hub must be sourced only from the adapter.
Europe—EC
Use TÜV licensed AC adapter of 12 V DC, min 500 mA.
Other Countries
Use a Safety Agency Approved AC adapter of 12 V DC, min 500 mA.
$
6 Laser/LED EN60825
$
7 This is a “CLASS 1 LED PRODUCT”
At time of installation the Fiber Optic Lasers/LED comply with FDA
Radiation Performance Standard 21CFR Subchapter J, applicable at date
of manufacture.
Caution: Power cord is used as a disconnection device. To de-energise
equipment disconnect the power cord.
$
8 Lightning Danger
Danger : Do not work on equipment or cables during periods of lightning
activity.
$
9 Do not block air vents.
Do not connect a telephone line into the signal connector.
$
10 Operating Temperature: This product is designed for a maximum ambient
temperature of 40 degrees C.
$
11 All Countries: Install product in accordance with local and National
Electrical Codes.