Allied Telesis AT-MC303 - Manual (Page 19)

AT-MC300 Series Installation Guide
9
Installing the AT-MC300 Series Media Converter
The following sections explain how to install the media converter. The unit
can be installed on a desktop or in an AT-MCR12 chassis.
Selecting a Site
Be sure to observe the following guidelines when selecting a site for the media
converter:
❑
Make sure that the unit’s power is accessible and cables can be
connected easily.
❑ Air flow around the unit and through its vents on the side and rear
must not be restricted.
❑
If you are installing the unit on a desk, make sure it is placed on a
level, secure desktop.
❑
Do not place objects on top of the unit.
❑
Do not expose the unit to moisture or water.
❑
Make sure it is in a dust-free environment.
❑
Use dedicated power circuits or power conditioners to supply reliable
electrical power to the network devices.
Verifying the Package Contents
Make sure the following items are included in your media converter package.
If any of the following items are missing or damaged, contact your sales
representative.
❑
One AT-MC300 Series Fast Ethernet Media Converter
❑
Four protective feet (for desktop installation only)
❑
External AC/DC power adapter
❑
This installation guide
❑
Warranty card