Allied Telesis OmniConnect ISDN - Manual (Page 7)

OmniConnect ISDN Quick Install Guide
vii
Operating Conditions for the United Kingdom
The following apply to the LanEdge OmniConnect ISDN internet access device
when used in the UK:
1. Interconnection directly, or by way of other apparatus, of ports marked U, S/
T, and Phone with ports marked or not so marked may produce hazardous
conditions on the network, and that advice should be obtained from a
competent engineer before such a connection is made.
2. The BRI connector must be hardwired permanently to the S-reference
connection point by using a connect-one-time-only, non-removable plug
(RJ45 with the latch tab removed).
3. This apparatus must be connected to a main socket outlet with a protective
earth contact.
4. Connection of power supply: LanEdge OmniConnect ISDN internet access
devices are intended for use when supplied with power from a supply
providing 220-240 VAC, 50/60 Hz up to 1.25A.