Allied Telesis OmniConnect ISDN - Manual (Page 21)

OmniConnect ISDN Quick Install Guide
11
Enter Password
Access to the OmniStart configuration utility is protected by a password. The
default password is omni. Enter omni in the dialog box titled Password and press
Enter or Next> to advance to the next screen.
To change the password from the default value, click the check box 'Select this box
to change the password' and then enter the new password in the New Password
and Confirm New Password dialog boxes and press Next>. This will change the
password to the new value. The maximum length of the password string is 15
characters and it may be any alphanumeric character. Pressing Cancel will
terminate the OmniStart installation.