Allied Telesis OmniConnect ISDN - Manual (Page 15)

5
Chapter 2
Installation
Use this section to verify your package contents, position the device, and
configure it.
Verifying OmniConnect ISDN Package Contents
— One OmniConnect ISDN Internet Access Device
— Accessory bag containing rubber feet and bumpers for desktop
placement, and screws for wall mounting the unit
— This Quick Install Guide
— One 10Base-T Ethernet Cable
— One analog telephone cable
— One two-piece AC power adapter
— A CD-ROM labeled OmniStart
— A Warranty Card
Placing the OmniConnect
You can wall mount a single LanEdge product, place it on a desktop, or interlock
two or more to form a single unit that occupies only one footprint on the
desktop.
Air vents are located on both sides of the LanEdge product casing.
Caution
Air vents must not be blocked and must have free access to the room
ambient air for cooling.