Allied Telesis AT-MC104ST/FS3, FS4 - Manual (Page 3)

iii
Safety Warnings
Standards: This product meets the following standards.
RFI Emission EN55022 Class B
!
1
Immunity EN50082-1 1997
!
2
Electrical Safety TUV-EN60950, UL1950, CSA 950
!
3
Laser EN60825
!
4
Power to the hub must be sourced only from the adapter.
!
9
USA/CANADA
Use a UL Listed/CSA Certified AC adapter of DC 12V, 500mA.
U.S. Federal Communications Commission
DECLARATION OF CONFORMITY
Manufacture Name: Allied Telesyn International, Corp.
Manufacture Address: 960 Stewart Drive, Suite B
Sunnyvale, CA 94086 USA
Manufacture Telephone: 408-730-0950
Declares that the Product: Fast Ethernet Media Converters
Model Numbers: AT-MC104XL, AT-MC104LH, AT-MC104SC/FS3,
AT-MC104ST/FS3, AT-MC104SC/FS4,
AT-MC104ST/FS4
This product complies with FCC Part 15B, Class B Limits:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device must not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on; the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer or registrant
of this equipment can void your authority to operate this equipment under Federal
Communications Commission rules.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.