Allied Telesis AT-FS708 CentreCOM - Manual (Page 27)

AT-FS708 and AT-FS708E Installation Guide
17
3. Problem 3:
Port 8 does not work.
❑
Solution 3:
— Connect to only one Port 8, either Port 8 MDI or Port 8 MDI-X.
Make sure you are connected to the correct Port 8.
4. Problem 4:
There is data loss between the switch and one of the connected network
nodes.
❑ Solution 4:
— Make sure that the distance between the switch and the
connected network device is no greater than 100 m (328 ft).
— Make sure you are using Category 5 cable.