Allied Telesis AT-FS708 CentreCOM - Manual (Page 17)

7
Chapter 2
Installation
Before You Proceed
Before installing the switch, make sure you read “Translated Safety and
Emission Information” on page 23.
Verifying Package Contents
Make sure that the package includes the following items:
❑ One AT-FS708 or AT-FS708E switch
❑ One AC power cord (AT-FS708) or power adapter (AT-FS708E)
❑ Two rackmounting brackets with screws (AT-FS708 only)
❑ Four self-adhesive rubber feet
❑ Warranty card
❑ This installation guide
If any of the above items is damaged or missing, contact your representative
immediately.
Note
For wall-mount installation, you must supply the two screws and plastic
anchors or other material necessary to physically mount the switch to
the wall.