Allied Telesis AT-FS708 CentreCOM - Manual (Page 21)

AT-FS708 and AT-FS708E Installation Guide
11
6. Attach the data cables and observe normal operation as indicated by the
port LEDs. Use only Port 8, either Port 8 MDI or Port 8 MDI-X.
Note
Auto-negotiation for transmission mode supports full-duplex only if the
connected device also negotiates for full-duplex transmission mode.
You are finished with rackmount installation.
Configuration
The following sections discuss standalone, cascade and uplink configurations.
Standalone Configuration
Figure 4 shows the switch connected to end stations and a server. The basic
physical connection for this configuration requires connecting one of the
switch’s ports to the adapter card of an end station.
Figure 4 AT-FS708 Connected to End Stations
X To PC = To HUB